Products
Construction QA is the global distributor of the new PDM³ for precision dynamic measurements and the sales representative of Pile Dynamics Inc. in Australia and New Zealand.
-
Pile Driving Monitor(PDM³)
The most advanced technology for monitoring pile installation and dynamic movements of structures…
-
Pile Driving Analyzer®(PDA) System
High strain dynamic load testing and pile driving monitoring system. Perform dynamic load testing on…
-
CAPWAP®(Case Pile Wave Analysis Program)
CAPWAP® (Case Pile Wave Analysis Program) Signal matching software that uses force and velocity data…
-
GRLWEAP14 Wave Equation Analysis
GRLWEAP14 is the pile driving simulation software of choice worldwide for pile driving professionals: Simulates…
-
Thermal Integrity Profiler(TIP™)
Evaluation of the entire cross-section and the entire length of the deep foundation element measuring…
-
Thermal Aggregator(TAG) and Thermal Acquisition Port (TAP EDGE)
Thermal Aggregator (TAG) and Thermal Acquisition Port (TAP-Edge) Units TAG and TAP-Edge units provide…
-
Shaft Area Profile Evaluator (SHAPE®)
A cost effective QA testing device providing a visual representation of a drilled foundation excavation…
-
Shaft Quantitative Inspection Device (SQUID™)
A new technology for quantitative, real-time assessment of the cleanliness and competency of the bottom…
-
Cross Hole Analyzer (CHAMP Q)
Evaluation of concrete quality in deep foundations by the Crosshole Sonic Logging method (CSL) allows…
-
PDI TOMO 3D Tomographic Software
PDI-TOMO is a 3D tomographic imaging tool that supplements the CHAMP output from crosshole sonic…
-
PDA‑DLT
The PDA-DLT monitors high strain dynamic load tests on drilled shafts and bored piles using…
-
Top Force Transducer
PDI offers Top Force Transducers for use with the Pile Dynamics Analyzer-Dynamic Load Tester (PDA-DLT)…
-
Static Load Tester(SLT)
Allows monitoring of multiple data collection boxes at once Up to 16 channels per data…
-
Pile Integrity Tester (PIT)
Low strain integrity testing by pulse echo or transient response methods. Reveals potential shaft or…
-
Pile Installation Recorder(PIR-Q)
An Automated Monitoring Equipment that assists in the installation of augered cast-in-place (ACIP)/continuous flight auger…
-
SPT Analyzer
Determines energy transferred by SPT Hammers using force and velocity measurements Offers simplified reporting and…
-
Saximeter(SAX-Q)
The Saximeter-Q incorporates the latest technological innovations with increased durability. The Saximeter-Q is an electronic…
-
E-Saximeter (E-SAX)
Handheld instrument registering relevant pile driving parameters, calculating diesel hammer stroke or hammer blows per…
-
Thermal Evaluation of Mass Pours (TEMP)
TEMP (Thermal Evaluation of Mass Pours) is a system that measures temperatures in various points…
-
Length Inductive Test Equipment (LITE)
The LITE evaluates the length of existing steel piles (Steel Sheet Piles, H-piles, Pipe piles,…
-
PDA Sensors and Accessories
Accelerometers and Strain Transducers
-
PDA Software Suite
PDA-S, iCAP®, PDIPLOT2 and PDI-Curves
-
PIT-W & PIT-S Software
PIT-W and PIT-S enhance the analysis of pulse-echo data obtained with the Pile Integrity Tester.